This vertical rubber cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.
This vertical rubber cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The nylon plate is installed on the base under the cutting knife for protecting the edge of the cutting knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
I.Advantages of tools
1.Cutting knife: Made of high-quality alloy 9CrSi, wear-resistant, sharp and high hardness
2. Cylinder: Made of professional seamless steel high-pressure cylinder; the piston rod is made of 45# steel after electroplating and fine grinding, with high wear resistance and good toughness; the sealing ring is made of high-quality rubber with high wear resistance and oil resistance, long life and good sealing.
3. The tool orientation adopts a copper guide column and guide sleeve structure, which has accurate orientation, small wear and long service life.
II. Technical parameters
Rubber cutter stroke (mm) | 660 |
Rubber cutter width (mm) | 760 |
Cylinder pressure (KN) | Approx. 125 |
Rubber cutting travel time | 14-18 45-60mm) |
Motor power (kW) | 5.5 |
Dimensions | 1800mm * 500mm * 2150mm |
Tag:
Medium rubber film slitting machine
Rubber hose coiling machine
Rubber hose cutting machine
Rubber open miller (open smelting machine)
Sunton Corporation Ltd
Manager:Wendy Lee
WhatsApp:+8613903181586
E-mail:schydro_hose@163.com
Copyright © Sunton Corporation Co.,Ltd All Rights Reserved
HTML XML